|
|
The
ST 7000 Series Stationary Transducers are ideal for use in power
and hand tool audit, calibration, and certification!
|
|
|
|
-
Test
electronic or mechanical hand torque wrenches
-
-
Measure
and record torquetorque load characteristics of electric,
pneumatic, or mechanical torque tools.
-
Audit
and certify transducerized tool calibration and performance
capability.
-
Test
torque or torque-angle power tools or hand torque wrenches.
-
Keyed
base for secure installation in tool shop or on test cart.
|
|
|
The 7000 Series Stationary Torque Tool Transducers are
ideal for auditing and certifying electronic and mechanical hand
torque wrenches. When equipped with a simulated joint adapter
it can be used to test and verify the performance of electric
and pneumatic power tools.
Click here
to download the complete Stationary Torque Sensor brochure in
PDF format.
Click
here to download the complete Small Stationary Torque
Sensor brochure in PDF format.
Click
here to view compatible RS Technologies instruments and readouts
|
|
|
SPECIFICATIONS
|
Output
@ Rated Capacity
|
2
mV/V, nominal |
|
Shunt
Calibration
|
2
mV/V with 43.575 kOhm Precision Resistor |
|
Overload
Capacity
|
150%
of Full Scale (FS) |
|
Non-linearity
|
±0.25%
FS |
|
Hysteresis
|
±0.25%
FS |
|
Zero
Balance
|
±2%
FS |
|
Excitation,
recommended
|
10
VDC or VAC (RMS) |
|
Bridge
Resistance
|
350
Ohm nominal |
|
Compensated
Temperature Range
|
70
to 150 °F |
|
Useable
Temperature Range
|
0
to 200 °F |
|
Temperature
Effect on Zero
|
±0.01%
FS / °F |
|
Temperature
Effect on Output
|
±0.01%
of Reading / °F |
|
Receptacle
|
Bendix
PT02H-8-4P |
|
Mating
Connector
|
Bendix
PT06A-8-4S(SR) (RST Part #42420-000600) |
|
|
Part
Number
|
Drive
Size
|
Capacity
|
Height
|
Height
w/Drive Adapter
|
Base
Height
|
Base
Diameter
|
|
077025-00012
|
1/4-inch
sq. dr.
|
100
lb-in (11.3 Nm)
|
2.19
|
2.50
|
1.75
|
4.00
|
|
077037-00022
|
3/8-inch
sq. dr.
|
200
lb-in (22.6 Nm)
|
2.38
|
2.88
|
1.75
|
4.00
|
|
077067-00051
|
3/8-inch
sq. dr.
|
50
lb-ft (67.8 Nm)
|
2.38
|
2.88
|
1.75
|
4.00
|
|
077050-001
01
|
1/2-inch
sq. dr.
|
100
lb-ft (136 Nm)
|
2.44
|
3.06
|
1.75
|
4.00
|
|
077050-00201
|
1/2-inch
sq. dr.
|
200
lb-ft (271 Nm)
|
2.44
|
3.06
|
1.75
|
4.00
|
|
077075-00501
|
3/4-inch
sq. dr.
|
500
lb-ft (678 Nm)
|
3.06
|
3.88
|
2.13
|
4.00
|
Click
here to check the wiring code for RS
Technologies stationary torque sensors
|
Working
hard to meet RoHS requirements for
a safer, cleaner environment!
Copyright
2007 RS Technologies Ltd., Farmington Hills, MI 48335 USA
| Bookmark this site | Contact Us
| All rights reserved.
|
|
