RS Technologies


		RT 3000 Reaction Torque Sensors

Model 3133, 3134, 3136, Typical

Ideal for use in measuring reaction torque in assembly operations!
Maintenance-free with no moving parts!
Wide variety of standard capacities with custom units available!

Model 3122, typical

RS Technologies manufactures a complete line of reaction torque sensors in capacities from 50 lb-in up to 250,000 lb-in (5.7--28,500 Nm). Using a full bridge, strain gage design, the RTS 3000 Series of reaction torque sensors contains no moving parts and is virtually maintenance free. If one of our standard designs is not suitable for your application, we will provide a quotation for a special unit based on your specific requirements.

You can also click here for a complete PDF formatted brochure of the RT 3000 Reaction Torque Sensors.

SPECIFICATIONS

Output at Rated Capacity	2.0 mV/V nominal
Overload Capacity	150% FS
Nonlinearity	±0.20% FS
Bridge Resistance	350 Ohms, nominal
Compensated Temperature Range	+75 to +150 °F
Operating Temperature Range	0 to 200 °F
Temperature Effect on Zero Balance	±0.01% FS/°F
Temperature Effect on Span	±0.01% of reading/°F
Recommended Excitation	10 vdc
Connector	6-PIN Bendix DT02H-10-6P

Contact RS Technologies regarding dimensions for these torque sensors!

PART NO.	CAPACITY
073122-00051	50 lb-in (5.7 Nm)
073122-00101	100 lb-in (11.3 Nm)
073122-00201	200 lb-in (22.6 Nm)
073122-00501	500 lb-in (56.5 Nm)
073122-00102	1,000 lb-in (113 Nm)
073134-00501	500 lb-in (56.5 Nm)
073134-00102	1,000 lb-in (113 Nm)
073134-00202	2,000 lb-in (226 Nm)
073136-00502	5,000 lb-in (565 Nm)
073136-00103	10,000 lb-in (1,130 Nm)
073133-00203	20,000 lb-in (2,260 Nm)
073133-00503	50,000 lb-in (5,650 Nm)
073133-00104	100,000 lb-in (11,300 Nm)

Click here to check the wiring code for RS Technologies reaction torque sensors

Working hard to meet RoHS requirements for a safer, cleaner environment!