 |
|
|
Fastener
Test System Accessories
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
Listed below are various accessories that RS Technologies uses in fastener testing. Each accessory is separated by its part number and a short description.
Fastener Test System Monitors, Printers, Accessories and Cables
089504-HPxxx H-P InkJet Color Printer 099600-30131 Strain Gage Bridge Input Junction Box 086000-31837 Precision Strain Gage Calibrator 102145-00001 Snap-On X-4 Torque Multiplier 102145-00491 Sweeney 5:1 Industrial Torque Multiplierw/mounting hardware (196 lb-ft max. input/1000 lb-ft max. output 102145-00492 Sweeney 15:1 Industrial Torque Multiplier w/mounting hardware (162 lb-ft max. input/22000 lb-ft max. output) 099404-30610 DB-15P to Bendix 4S, Model 960/9404/9504 to 4-pin Load Cell, 10 feet uncoiled 099404-34011 DB-15P to Bendix 4S, Model 960 to 4-pin Load Cell, 3 feet uncoiled 099404-30563 DB-15P w/Screw Clip to Bendix 10S, Models 960/9404/9504 to Torque-Angle Sensor, 10-ft uncoiled 099504-31843 DB-15P to Bendix 6S, Model 960/9404/9504 to 6-pin Sensor, 10-ft uncoiled 099404-30566 (2) DB-15P to Bendix 10S, Model 9404/9504 to Torque-Tension Load Cell, 10-feet uncoiled
Working
hard to meet RoHS requirements for a safer, cleaner environment!
Copyright 2007 RS Technologies Ltd., Farmington Hills, MI 48335 USA | Bookmark this site | Contact Us | All rights reserved.