 |
Fastener
Tension Load Cell
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
Measure clamp load with high accuracy right as the fastener is being tightened!
The CF 9000 Series Fastener Tension Load Cells are ideal for auditing and analyzing threaded fastener characteristics in production lot testing or in research and development studies!
You can download a complete brochure of our Fastener Tension Load Cells in PDF format by clicking here.
-
Perform laboratory evaluation of fastener tension or torque-tension characteristics
-
Measure fastener tension, thread friction torque, or both during rundown operations
-
Test special devices such as locknuts, serrated underheads, thread-locking adhesives, and friction patches
-
Measure effects of materials, surface finishes, platings, and coatings
-
Use standard Skidmore-Wilhelm plates or order custom plates for special fasteners
-
Slotted base makes it easy to secure to existing test fixtures
|
PART
NO.
|
DESCRIPTION
|
CAPACITY
|
|
059810-01153
|
Clamp
Force Transducer
|
15 kN (3,372 lbf)
|
|
059810-01253
|
Clamp
Force Transducer
|
25
kN (5,620 lbf)
|
|
059810-01104
|
Clamp
Force Transducer
|
100
kN (22,481 lbf)
|
|
059810-01304
|
Clamp
Force Transducer
|
300
kN (67,443 lbf)
|
|
059810-01504
|
Clamp
Force Transducer
|
500
kN (112,405 lbf)
|
|
SPECIFICATIONS
|
|
|
Output
@ Rated Capacity
|
2.0 mV/V,
nominal
|
|
Overload
Capacity
|
50% of
rated load
|
|
Non-linearity
|
±0.2%
of Full Scale (FS)
|
|
Hysteresis
|
±0.2%
of FS
|
|
Zero
Balance
|
±1%
of FS
|
|
Excitation
Voltage
|
±10
vdc or ac rms, max.
|
|
Bridge
Resistance
|
350 Ohms,
full bridge, bonded strain gage
|
|
Compensated
Temperature Range
|
70 to
150 °F
|
|
Useable
Temperature Range
|
0 to 200
°F
|
|
Temperature
Effect on Zero
|
±0.01%
of FS /°F
|
|
Temperature
Effect on Output
|
±0.1%
of Reading / °F
|
|
Working
hard to meet RoHS requirements for a safer, cleaner environment! Copyright 2007 RS Technologies Ltd., Farmington Hills, MI 48335 USA | Bookmark this site | Contact Us | All rights reserved. |