The MC 6012 Series load cells are designed to measure the side and radial loads developed in tire testing applications. Two load cells are normally used in typical applications as shown in the figure below. Overload protection up to 200% of capacity is provided for all axes.

You can download a complete brochure about MC 6012 Load Cells in PDF format by clicking here.

SPECIFICATIONS

Output at Rated Capacity	1.00 mV/V nominal
Overload Capacity	200% of Full Scale (FS)
Non-linearity	±0.25% FS
Hysteresis	±0.25% FS
Repeatability	±0.05% FS
Excitation Voltage	±15 vdc, maximum
Bridge Resistance	350 Ohms, nominal
Compensated Temperature Range	70 to 150 °F
Temperature Effect on Zero	±0.002% FS / °F
Temperature Effect on Span	±0.002% of Reading / °F
Zero Offset	0.000 ±0.020 mV/V
Shunt Cal	1.000 mV/V w/87.150K Ohm resistor