RS Technologies


		Precision Electronic Hand Torque Wrenches with LED Indicators

Tri-color LED to signal within limits, high, or low measurement
Durable, ergonomic design
Lighter weight and higher strength than other designs
Compatible with most strain gage instruments and data collectors

The electronic hand torque wrenches from RS Technologies are lightweight precision tools that are designed with ergonomics in mind. Now equipped with a tricolor LED, they are among the lightest weight in the industry but have proven their durability in the toughest industrial environments. The narrowed down head permits access to close quarters. The comfortable foam handgrips are easy on the operator's hand. These wrenches with LEDs function fully when used with the Model 920 Digital Instrument and are completely compatible with all instruments from RS Technologies. They can be supplied so that the LEDs function with many popular data collectors.

SPECIFICATIONS

Full Scale Output

2 mv/v (output and shunt calibration are matched to within ±0.25% to assure interchangeability; output is matched for specified English units)

Shunt Calibration

2.00 mV/V ±0.25% with 43.575k Ohm resistor

Non-linearity

±0.25% Full Scale

Hysteresis

±0.25% Full Scale

Zero Balance

±1% Full Scale

Overload Capacity

150% of Full Scale

Bridge Resistance

350 Ohms, nominal

Excitation

10 vdc or vac (RMS)

Connector

Bendix PT02H-12-10P

Mating Connector

Bendix PT06A-12-10S(SR), RST Part #42420-000620

CAPACITIES
Part Number	Drive Size	Handle	Capacity
027125-03012	1/4-inch	8-in.	100 lb-in (11.4 Nm)
027137-03022	3/8-inch	12-in.	200 LB-in (22.7 NM)
027137-03051	3/8-inch	12-in.	50 lb-ft (68Nm)
027250-03101	1/2-inch	21-in.	100 LB-ft (136 NM)
027250-03201	1/2-inch	21-in.	200 LB-ft (272 NM)
027250-03301	1/2-inch	28-in.	300 LB-ft (407 NM)
027375-03501	3/4-inch	43-in.	500 LB-ft (678 NM)

Click here to check the wiring code for RS Technologies Hand Torque Wrenches

Working hard to meet RoHS requirements for a safer, cleaner environment!